Sandstrom S650PBB15 Instruction Manual

To charge the Sandstrom S650PBB15 Power Bank for the first time, connect it to a power source using the supplied USB cable. Make sure it's fully charged before initial use, which can take up to 8 hours.
The Sandstrom S650PBB15 Power Bank has LED indicators. Once all the LEDs are lit and stop flashing, the power bank is fully charged.
Ensure that the power bank is charged, and check the connection between your device and the power bank. Try using a different cable to see if the issue persists.
To maintain battery health, avoid fully depleting the power bank's charge frequently. Charge it when the capacity falls below 20%. Store it in a cool, dry place when not in use.
Yes, the Sandstrom S650PBB15 supports pass-through charging, which allows you to charge both the power bank and your device at the same time.
If the power bank overheats, disconnect it from all devices and allow it to cool down. Avoid using it until it returns to a normal temperature. Ensure it's being used in a well-ventilated area.
It typically takes around 6 to 8 hours to fully charge the Sandstrom S650PBB15, depending on the power source used.
If the LED indicators do not light up, make sure the power bank is charged. Try pressing the power button. If there's no response, it may require service or a replacement.
The Sandstrom S650PBB15 is compatible with most USB-charged devices. However, ensure your device's input requirements match the power bank's output. Refer to your device's manual for compatibility.
To clean the power bank, use a soft dry cloth to wipe the surface. Avoid using water or any cleaning agents that may damage the electronic components.