Sandstrom S40PFB21E Instruction Manual
![Sandstrom S40PFB21E manual cover](/images/yGpaRsXkekiXmATzKJZSdNmF/thumbs/thumb175x175.webp)
To assemble the Sandstrom S40PFB21E Fan, first attach the base to the lower pole, tighten the screws, and then connect the upper pole to the lower one. Finally, secure the fan head onto the upper pole and ensure all parts are firmly tightened.
If the fan is not turning on, check if it is plugged into a working power outlet. Ensure the power switch is in the 'on' position. If it still does not work, inspect the fuse in the plug, and replace it if necessary.
To clean the fan, first unplug it from the power source. Remove the front grill and blades, then wipe them with a damp cloth. Use a vacuum or compressed air to remove dust from the motor and reassemble the parts once they are completely dry.
Regularly clean the fan blades and grill to prevent dust build-up. Check the screws and bolts periodically to ensure they are tight. Lubricate the motor and moving parts annually to maintain smooth operation.
To adjust the height of the Sandstrom S40PFB21E Fan, loosen the height adjustment knob located on the pole, slide the pole to the desired height, and then retighten the knob securely.
The Sandstrom S40PFB21E Fan offers multiple oscillation settings, including fixed position, 90-degree oscillation, and 180-degree oscillation, which can be adjusted via the control panel.
If the fan is making unusual noises, check that all screws and bolts are tight. Ensure the blades are clean and properly aligned. If noise persists, inspect the motor and lubricate if necessary.
The Sandstrom S40PFB21E Fan is designed for indoor use only. Using it outdoors can lead to damage from weather elements and void the warranty.
To set the timer function, use the timer button on the control panel to select the desired time interval. The fan will automatically turn off after the set time elapses.
If the fan blades are not spinning smoothly, check for any obstructions and ensure the blades are securely attached. Inspect the motor for dust accumulation and lubricate it if needed.