Sandstrom S30DH21G Instruction Manual
![Sandstrom S30DH21G manual cover](/images/ktdDBVTKEhcboEKosQyEhyCR/thumbs/thumb175x175.webp)
To set up your Sandstrom S30DH21G Dehumidifier, first place it upright on a flat and stable surface. Make sure there is at least 20 cm of space around the unit for proper air circulation. Plug the dehumidifier into an appropriate power outlet, then press the power button to turn it on. Adjust the humidity settings using the control panel as desired.
If your dehumidifier is not collecting water, ensure that the room temperature is above 5°C, as it may not function efficiently in lower temperatures. Check that the humidity level is set correctly and that the air filter is clean. Also, verify that the water tank is properly installed and not full.
To clean the air filter, first turn off and unplug the dehumidifier. Remove the filter cover and take out the filter. Use a vacuum cleaner to remove dust and debris from the filter, or wash it with lukewarm water. Ensure the filter is completely dry before reinstalling it.
It is recommended to clean the air filter every two weeks, or more frequently if used in a dusty environment. The water tank should be emptied and rinsed regularly to prevent mold growth. Additionally, inspect the dehumidifier for any signs of wear or damage every few months.
To adjust the humidity level, press the 'Humidity' button on the control panel. Use the up and down arrows to set the desired humidity level. The dehumidifier will automatically maintain the set humidity level once adjusted.
A loud noise could be caused by an uneven surface or loose components. Ensure the dehumidifier is on a stable surface and check for any loose parts. If the noise persists, inspect the fan and compressor for obstructions or damage.
Yes, the Sandstrom S30DH21G Dehumidifier can be used continuously. Make sure to set it to continuous mode by adjusting the settings on the control panel. Ensure the water tank is emptied regularly, or connect a drainage hose for continuous drainage.
The 'Tank Full' indicator light means that the water tank is full and needs to be emptied. Turn off the dehumidifier, remove the tank, and empty the water. Reinsert the tank securely before turning the unit back on.
To store the dehumidifier, turn it off and unplug it. Empty and dry the water tank and clean the air filter. Coil the power cord and store the unit in a dry, cool place away from direct sunlight and moisture.
If the dehumidifier stops working suddenly, check the power supply and ensure the unit is plugged in properly. Inspect the circuit breaker and fuse. If the issue persists, consult the user manual for troubleshooting tips or contact customer support.