Sandstrom S130BT13E Instruction Manual
![Sandstrom S130BT13E manual cover](/images/lGzHeksKPVSUwUevTjTKxbBz/thumbs/thumb175x175.webp)
To connect your Sandstrom S130BT13E Dock to a Bluetooth device, ensure the dock is powered on. Press the Bluetooth button to enter pairing mode, indicated by a flashing LED. On your Bluetooth device, search for available devices and select 'S130BT13E' to pair.
Check if the power cable is securely connected to both the dock and the power outlet. Verify that the outlet is functional by testing with another device. If the problem persists, try using a different compatible power cable.
To reset the dock, press and hold the power button for approximately 10 seconds until the LED indicators reset. This will restore the dock to its original factory settings.
Ensure that the volume is turned up on both the dock and your connected device. Check that the dock is properly paired with your device and that it's not muted. Also, inspect the audio source for any issues.
To update the firmware, visit the Sandstrom website for any available updates. Follow the instructions provided with the firmware download to complete the update process.
The Sandstrom S130BT13E Dock supports connecting one device at a time via Bluetooth. To switch devices, disconnect the current device and pair the new one.
To clean the dock, gently wipe the surface with a soft, dry cloth. Avoid using any liquids or harsh chemicals that could damage the unit.
To improve Bluetooth range, ensure there are no obstacles between the dock and the connected device. Keep the dock away from other electronic devices that may cause interference.
Check that the volume on the dock and connected device is not set too high, which can cause distortion. Ensure the audio file or stream is of good quality. If distortion persists, try resetting the dock.
To extend battery life, avoid leaving the dock in direct sunlight or extreme temperatures. When not in use, turn off the dock. Regularly charge the dock rather than letting it completely discharge.