Sandstrom S12DH19E Instruction Manual
![Sandstrom S12DH19E manual cover](/images/VkQCTzJuzmTBpwtbmQsBzPoV/thumbs/thumb175x175.webp)
To clean the filter, first unplug the dehumidifier. Remove the filter from the back of the unit by gently pulling it out. Rinse it under lukewarm water and let it dry completely before reinserting it.
Ensure the humidity setting is lower than the current room humidity. Check if the filter is clean and the air intake is unobstructed. Also, verify that the room temperature is above 41°F (5°C), as the unit may not function effectively in colder conditions.
Press the humidity control buttons on the control panel to adjust the desired humidity level. The display will show the current setting, allowing you to increase or decrease it as needed.
The dehumidifier may shut off if the water tank is full or not positioned correctly. Check the tank and ensure it is properly seated. Additionally, the unit may shut off if the desired humidity level is reached.
It is recommended to clean the filter every two weeks, empty the water tank regularly, and inspect the unit for any signs of damage or wear every month.
Yes, the Sandstrom S12DH19E can operate continuously. Ensure the continuous drainage option is set up by connecting a suitable hose to the drainage outlet. This prevents the need to empty the water tank manually.
Check if the dehumidifier is placed on a level surface and ensure that all parts are securely attached. Clean the filter and check for any obstructions in the air intake or exhaust vents.
Clean and dry the unit thoroughly, including the filter. Coil the power cord and store the dehumidifier in a cool, dry place. Ensure it is protected from dust and direct sunlight.
Yes, it is normal for the dehumidifier to release some heat as it removes moisture from the air. Ensure there is adequate space around the unit for proper ventilation.
To reset the dehumidifier, unplug the unit for a few minutes and then plug it back in. This can help resolve minor issues and restore functionality.