Sandstrom S12DC16E Instruction Manual
![Sandstrom S12DC16E manual cover](/images/CfdCfQezlkYAOxrtqUFsKXoo/thumbs/thumb175x175.webp)
To set the timer, press the 'Program' button and use the 'Hour' and 'Minute' buttons to set your desired brew time. Confirm your selection by pressing 'Program' again.
Ensure the coffee maker is plugged in and the power switch is turned on. Check that there is water in the reservoir and the carafe is properly positioned on the warming plate.
To clean the coffee maker, regularly wash the carafe and filter basket with warm soapy water. Descale the machine monthly using a mixture of vinegar and water. Run a brewing cycle with the mixture, then two cycles with fresh water.
Ensure the filter basket is not overfilled and the carafe is positioned correctly. Use the recommended amount of coffee grounds and do not exceed the maximum water level in the reservoir.
This could be due to mineral buildup. Descale the coffee maker to remove any deposits. Also, ensure the machine is placed on a stable, flat surface to reduce noise.
Yes, you can use paper filters. Make sure to use the correct size that fits the filter basket. Alternatively, you can use the reusable filter provided.
To adjust the coffee strength, vary the amount of coffee grounds used. More grounds will result in a stronger brew, while fewer grounds will make it milder.
Check if the water reservoir is overfilled or if there are any cracks. Ensure the carafe lid is secure and the filter basket is properly aligned. If the issue persists, contact customer support.
Ensure the carafe is properly positioned; the machine has a drip-stop feature. If dripping continues, clean the valve at the bottom of the filter basket.
It is recommended to replace the water filter every two months or after approximately 60 brewing cycles for optimal performance and taste.