Nextbase DAB350BT Instruction Manual
![Nextbase DAB350BT manual cover](/images/425b257b45dc1d34867430df/thumbs/thumb175x175.webp)
To pair your phone with the Nextbase DAB350BT, ensure Bluetooth is enabled on your phone. Then, on the DAB350BT, navigate to Bluetooth settings and select 'Pair New Device'. On your phone, search for available devices and select 'Nextbase DAB350BT'. Confirm the pairing code if prompted.
Ensure that the DAB350BT is properly connected to your car's audio system. Check the volume level on both the DAB350BT and your car stereo. Also, verify that the device is not muted and that the correct audio source is selected.
Visit the Nextbase official website and download the latest firmware update for the DAB350BT. Transfer the update file to a USB drive, insert the drive into the DAB350BT, and follow the on-screen instructions to complete the update.
Check that the device is properly connected to a power source. Inspect the fuse in the power cable and replace it if necessary. If the problem persists, try resetting the device by holding the power button for 10 seconds.
To reset the DAB350BT to factory settings, go to the settings menu, select 'System', and choose 'Factory Reset'. Confirm the reset when prompted. This will erase all settings and restore the device to its original state.
Yes, the Nextbase DAB350BT can be used with compatible steering wheel controls. You may need an additional adapter to connect the DAB350BT with your vehicle's steering wheel control system. Consult your vehicle's manual for compatibility details.
Ensure that the DAB antenna is correctly installed and positioned vertically for optimal reception. Avoid placing the antenna near metallic surfaces. In areas with poor reception, consider using a signal booster.
To connect the DAB350BT to an external amplifier, use the line-out RCA connections on the back of the device. Connect these to the input of your amplifier using appropriate RCA cables, ensuring a secure connection.
While listening to a station, press and hold one of the preset buttons on the DAB350BT until you hear a confirmation beep. The station is now saved and can be accessed by pressing the corresponding preset button.
Frequent Bluetooth disconnections can be caused by interference from other devices, low battery on your phone, or outdated firmware. Ensure your phone is within range, check for firmware updates, and minimize interference by turning off other Bluetooth devices.