Nespresso Lattissima Plus My Machine Instruction Manual

To descale your Nespresso Lattissima Plus, fill the water tank with the descaling solution, place a container under the coffee outlet, and start the descaling process following the instructions in the user manual.
Check if there is water in the tank, ensure the capsule is correctly inserted, and make sure the machine is turned on. If the problem persists, refer to the troubleshooting section in the manual.
Disassemble the milk frother components and wash them with warm soapy water. Rinse thoroughly and let them dry before reassembling.
Ensure the cup is preheated by rinsing it with hot water. If the issue persists, check if the machine needs descaling.
A blinking light typically indicates that the machine requires descaling or that there is an error. Refer to the user manual for specific blinking patterns and their meanings.
It is recommended to descale your machine every 3 months or after every 300 uses to ensure optimal performance.
While it is possible to use compatible capsules, it is recommended to use Nespresso capsules for the best quality and to avoid any potential damage to the machine.
Check if the water tank is properly seated and not overfilled. Inspect the drip tray and ensure it is not full. If leaking persists, contact Nespresso customer service.
To reset the machine, press and hold the 'Lungo' and 'Espresso' buttons simultaneously for 5 seconds until the lights blink three times.
Regularly clean the drip tray, capsule container, and water tank. Descale the machine every 3 months and clean the milk frother after each use.