MSI MPG Z390I Gaming Edge AC Quick Start Guide
![MSI MPG Z390I Gaming Edge AC manual cover](/images/0f9869b3475afdbfc289cba8/thumbs/thumb175x175.webp)
To update the BIOS, visit the MSI official website, download the latest BIOS version for the MPG Z390I Gaming Edge AC, and follow the instructions provided in the manual. You can use the M-Flash utility within the BIOS for a straightforward update process.
The motherboard supports DDR4 memory with speeds up to 4600 MHz (OC). It has two DIMM slots and supports a maximum of 32GB of RAM. Ensure that the memory is non-ECC and unbuffered.
Check all power connections, ensure RAM is properly seated, and reset the CMOS by removing the battery or using the onboard jumper. If the issue persists, try booting with minimal hardware to isolate the problem.
Yes, the motherboard supports overclocking for both the CPU and RAM. You can adjust various settings within the BIOS under the 'OC' tab to enhance performance. Ensure adequate cooling to prevent overheating.
To install an M.2 SSD, locate the M.2 slot on the motherboard, remove the screw, insert the SSD at an angle, and secure it with the screw. Ensure the SSD is compatible with the M.2 slot specifications.
Enter the BIOS setup during boot by pressing the 'Delete' key. Navigate to the 'OC' section and enable XMP (Extreme Memory Profile) to allow your RAM to run at its rated speed.
Ensure the graphics card is properly seated in the PCIe slot and that power cables are connected. Check for any BIOS settings that might affect PCIe operation and update the BIOS if necessary.
The motherboard has RGB headers that can be connected to compatible RGB devices. Use the MSI Mystic Light software to control and customize the lighting effects.
The motherboard features Realtek ALC892/ALC897 codec, providing 7.1-channel high-definition audio. It supports audio boost technology for enhanced sound quality.
Ensure the Wi-Fi antennas are securely attached. Update the Wi-Fi drivers through the MSI website and check network settings in the operating system. Restart the router if necessary.