Midland HH54 Quick Start Instructions
![Midland HH54 manual cover](/images/npsEYCxjcuZgGyubbehgOkeU/thumbs/thumb175x175.webp)
To program frequencies, press and hold the 'MENU' button until 'CHANNEL' appears. Use the 'UP' and 'DOWN' arrows to select the desired channel. Press 'SELECT' and use the arrows to choose the frequency. Press 'SELECT' again to save.
Ensure the antenna is fully extended and positioned vertically. Relocate to an area with fewer obstructions and higher elevation if possible. Additionally, check that the weather alert signal is strong in your area.
First, check the battery compartment for proper battery placement. Replace with fresh batteries if needed. If using a power adapter, ensure it is securely connected. If the issue persists, perform a factory reset by removing the batteries and power adapter for a minute before reinstalling them.
To perform a factory reset, remove the batteries and any external power source. Wait for at least one minute, then reinsert the batteries and reconnect the power adapter. This will reset the radio to its default settings.
Ensure that the radio is set to the correct S.A.M.E. code for your area. Verify that the alert type is enabled in the settings menu. Additionally, check signal strength and relocate if necessary.
Yes, you can use rechargeable NiMH batteries. However, ensure they are fully charged before use, as the radio's battery indicator may not accurately reflect their charge level.
Press 'MENU' to navigate to 'WEATHER ALERT'. Use the 'UP' and 'DOWN' arrows to toggle between 'ON' and 'OFF'. Select 'ON' to enable alerts. Press 'SELECT' to confirm your choice.
The Midland HH54 Radio does not support firmware updates. Ensure you are using the radio according to the latest manual and specifications provided by the manufacturer.
To extend battery life, reduce the backlight brightness and shorten the backlight duration. Additionally, turn off the radio when not in use and use the 'LOCK' feature to prevent accidental button presses.
Yes, to lock the keypad, press and hold the 'LOCK' button until the lock icon appears on the display. This prevents accidental changes to settings. To unlock, press and hold the 'LOCK' button again.