Sony ICF-C290 v2 Operating Instructions

To set the alarm on the Sony ICF-C290, press the ALARM button. Use the TUNING dial to set the desired alarm time and confirm with the ALARM button again.
To adjust the clock time, press and hold the CLOCK button. Use the TUNING dial to set the current time, and release the CLOCK button to save the settings.
If the display is not showing properly, check if the device is properly plugged into a power source. Reset the clock by disconnecting and reconnecting the power cord if necessary.
To change the AM/PM format, press and hold the CLOCK button while adjusting the TUNING dial until the desired format is displayed. Release the CLOCK button to save.
Ensure the alarm is turned on by checking the ALARM indicator on the display. Verify the set time and make sure the volume is turned up.
To improve radio reception, adjust the position of the antenna and place the unit near a window. Avoid placing the unit near other electronic devices.
To reset the Sony ICF-C290, unplug the power cord from the wall outlet. Wait for a few minutes, then plug it back in to reset the system.
No, the Sony ICF-C290 does not support battery operation. It must be plugged into a power outlet to function.
To clean the exterior, use a soft, dry cloth. Avoid using any chemical cleaners or abrasive materials that may damage the surface.
If the sound is distorted, check the volume level and reduce it if necessary. Ensure the speaker is not obstructed and check the connection to the power source.