Sony ICF-C8WM v2 Operating Instructions
![Sony ICF-C8WM manual cover](/images/448901b40a59090fda5d6725/thumbs/thumb175x175.webp)
To set the alarm time, press and hold the ALARM button until the hour digits begin to flash. Use the TUNING + or - buttons to adjust the hour. Press ALARM again to set the minutes, and adjust using the TUNING + or - buttons. Press ALARM one more time to confirm the setting.
For better radio reception, ensure the FM wire antenna is fully extended. For AM reception, try rotating the unit horizontally for optimal signal. Avoid placing the device near metal objects or electronic devices that may cause interference.
To adjust the display brightness, press the SNOOZE/BRIGHTNESS button repeatedly. The display will cycle through different brightness levels. Select your preferred brightness by stopping at the desired setting.
To reset the unit to factory settings, unplug the power cord and remove any backup batteries. Wait for a few minutes, then reinsert the batteries and plug the power cord back in. This will reset the clock and all settings.
To switch the time format, press and hold the CLOCK button until the hour digits flash. Continue holding until either "AM" or "24H" appears on the display. Use the TUNING + or - buttons to select your preferred format, then press CLOCK to confirm.
Ensure that the power cord is securely connected to both the unit and the power outlet. Check if the outlet is working by testing it with another device. If the issue persists, inspect the backup batteries and replace them if necessary.
Yes, the Sony ICF-C8WM can be used with rechargeable batteries. However, it is recommended to use the device primarily with the AC power adapter to ensure optimal performance. Only use rechargeable batteries as a backup power source.
Regularly dust the unit with a soft, dry cloth. Avoid using any chemical cleaners. Check and replace backup batteries annually to prevent leakage. Keep the unit away from heat sources and ensure it is in a well-ventilated area.
To set a radio station as the alarm sound, first tune to the desired station. Then, press and hold the ALARM button and select the radio option as the alarm sound using the TUNING + or - buttons. Confirm your choice by pressing the ALARM button again.
Distorted sound can be caused by interference or poor reception. Ensure the FM antenna is fully extended and the unit is positioned away from electronic devices. Adjust the volume to a lower level and verify that the selected station is properly tuned.