LG Stylo 6 LMQ730QM0.AUCLWH User Guide
![LG Stylo 6 LMQ730QM0.AUCLWH Phone manual cover](/images/rEsyCBEEKKlEGglFycOTtXdI/thumbs/thumb175x175.webp)
To perform a factory reset on your LG Stylo 6, go to Settings > System > Restart & Reset > Factory data reset. Confirm your choice and the phone will reset to its original settings.
To extend battery life, reduce screen brightness, turn off unused apps, disable Bluetooth and Wi-Fi when not needed, and enable Battery Saver mode in Settings.
If your LG Stylo 6 won't turn on, try charging it for at least 30 minutes, then press and hold the power button for 10 seconds. If it still doesn't turn on, try a different charger or cable.
You can use LG Mobile Switch to transfer data from your old phone to your LG Stylo 6. Install the app on both phones and follow the instructions to transfer your data wirelessly or via USB.
Your LG Stylo 6 may run slow due to too many apps running in the background. Close unnecessary apps, clear cache, and ensure your software is up to date. Consider a factory reset if the problem persists.
To take a screenshot on the LG Stylo 6, press and hold the Volume Down and Power buttons simultaneously until you see the screen flash.
To improve camera quality, ensure the lens is clean, use manual mode for better control, adjust the resolution settings, and ensure adequate lighting while taking photos.
If the touch screen is unresponsive, try restarting the phone. If the issue remains, check for software updates or perform a factory reset. If the problem persists, contact LG support.
To update the software on your LG Stylo 6, go to Settings > System > Update center > Software Update. Tap on "Check for updates" and follow the instructions if an update is available.
To use the stylus on the LG Stylo 6, remove it from its slot on the bottom of the phone. Once removed, you can draw, write, or navigate your phone. Use the Pen Pop menu for shortcuts.