LG DLG2302R DLG2302R.ACREEUS User Guide
![LG DLG2302R DLG2302R.ACREEUS Dryer manual cover](/images/VQQCHwrdORUgyEZFBDcekNKL/thumbs/thumb175x175.webp)
To clean the lint filter, first turn off the dryer and open the door. Remove the lint filter from the bottom of the door opening. Use your fingers to roll any lint off the filter, then rinse it under warm water if needed. Dry thoroughly before reinserting.
Ensure the gas supply is turned on and the dryer is plugged in. Check the circuit breaker and reset if necessary. Clean the lint filter and ensure there are no blockages in the exhaust vent. If the issue persists, consider contacting a professional technician.
Place a level on top of the dryer. Adjust the leveling feet by turning them clockwise to raise or counterclockwise to lower the dryer until it is level from front to back and side to side.
To prevent wrinkles, promptly remove clothes from the dryer once the cycle is complete. Use the Wrinkle Care option if available, and avoid overloading the dryer.
Check for a clogged lint filter or exhaust vent, as these can restrict airflow. Ensure the dryer is not overloaded and that the selected drying cycle matches the fabric type.
Unplug the dryer from the power outlet and wait for about 5 minutes. Plug the dryer back in and check if the issue persists. This process can help reset the appliance's control board.
Regularly clean the lint filter before or after each load. Inspect and clean the exhaust duct annually to prevent lint buildup. Check the drum and door seal for wear and replace as needed.
Ensure the dryer is level and not touching any other appliances or walls. Check for loose items inside the drum and remove them. Tighten any loose screws on the dryer.
Refer to the user manual to identify the error code. Some common solutions include checking the power supply, ensuring the door is properly closed, and resetting the dryer. If problems continue, consult a technician.
Yes, you can use dryer sheets in the LG DLG2302R dryer. Place the sheet on top of the clothes in the drum before starting the cycle. Avoid overloading the dryer to ensure even distribution.