Hoover WDXOA 496AF-80 User Guide
![Hoover WDXOA 496AF-80 manual cover](/images/uFMumHSOSwYrePDrCfuqPhxI/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add detergent to the appropriate compartment in the detergent drawer. Close the door securely. Use the program selector dial to choose the desired wash cycle. Press the start/pause button to begin the cycle.
Ensure the appliance is plugged in and switched on. Check if the door is closed properly. Verify if there is a power supply issue. If the problem persists, try resetting the machine by turning it off and on again. Consult the user manual for additional troubleshooting steps.
To clean the detergent drawer, pull it out gently until it stops. Press the release button to fully remove it. Wash the drawer under warm water to remove any detergent residue. Dry thoroughly before reinserting it into the washing machine.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the filter monthly, and ensuring the drum is free of debris. Run an empty hot wash cycle with a washing machine cleaner periodically to maintain hygiene.
Check that the water inlet hoses are securely connected and not damaged. Inspect the door seal for any debris or wear. Ensure the detergent drawer is not clogged. If the leak persists, consult a professional technician.
Yes, the Hoover WDXOA 496AF-80 has a specific program for delicate fabrics. Use the program selector to choose the 'Delicates' cycle, and use a suitable detergent for delicate clothing.
First, check that the drain hose is not kinked or blocked. Inspect the pump filter for blockages and clean if necessary. If the problem continues, ensure the drain hose is at the correct height (between 65-100 cm from the floor).
Ensure the load is not too large or too wet for the dryer capacity. Clean the filter and ensure adequate ventilation around the machine. Consider using a higher spin speed in the wash cycle to reduce drying time.
The maximum load capacity for the washing cycle is 9 kg, while the drying cycle can handle up to 6 kg. Avoid overloading the machine to ensure optimal performance and avoid damage.
Ensure that the machine is level and stable on the floor. Check that all transit bolts have been removed. Avoid overloading the machine and distribute laundry evenly inside the drum.