Hoover DXOA 610HCB 1-80 User Guide
![Hoover DXOA 610HCB 1-80 manual cover](/images/677b8dab0e2e04f52a0635c1/thumbs/thumb175x175.webp)
To perform a quick wash, select the 'Rapid 14', '30', or '44' minute program on the control panel. Adjust the spin speed and temperature as needed, then press the start button.
Check the drain hose for any blockages and ensure it's not kinked. Also, inspect the filter for debris and clean it if necessary. If the problem persists, consult the user manual or contact customer support.
Ensure that the washing machine is level and stable on the floor. Check that the load is balanced and not overloaded. You can also place anti-vibration pads under the feet of the machine.
Regularly clean the detergent drawer, door seal, and filter. Perform a drum clean cycle using a washing machine cleaner every month. Check hoses for signs of wear and replace if necessary.
To reset the machine, turn it off and unplug it from the power supply. Wait for about 5 minutes, then plug it back in and turn it on. If the error persists, refer to the error code guide in the user manual.
Use a high-efficiency (HE) detergent for best results. Follow the detergent manufacturer's instructions on the amount to use based on load size and soil level.
Locate the filter at the bottom front of the machine. Open the cover, unscrew the filter cap, and remove any debris. Rinse the filter under running water before reattaching it.
Ensure the water supply is turned on and the inlet hose is not kinked or blocked. Check the inlet filter for debris and clean it if necessary. If the issue persists, inspect the water tap and pressure.
Yes, use the 'Delicate' program and select a low spin speed to protect delicate fabrics. It is also advisable to place delicate items in a laundry bag.
Keep the door slightly ajar when not in use to allow air circulation. Regularly clean the door seal and drum, and use a washing machine cleaner monthly to prevent mold buildup.