Hoover WDXOA 485CR-80 User Guide
![Hoover WDXOA 485CR-80 manual cover](/images/azwBRtziNWbloFuwgAfakqZz/thumbs/thumb175x175.webp)
To start a washing cycle, load your laundry into the drum, add detergent to the dispenser, select the desired program using the rotary knob, and press the start button.
Ensure that the machine is properly plugged in, the door is closed securely, and the water supply is turned on. Additionally, check the circuit breaker or fuse box for any issues.
Remove the detergent drawer by pulling it out until it stops, then press the release lever and pull it out completely. Wash the drawer under warm water to remove any residue.
Regularly clean the detergent drawer, check and clean the filter, and wipe the door seal to prevent mold and mildew. Ensure the machine is level to avoid excessive vibration.
Check the drain hose for kinks or blockages, ensure the filter is clean, and verify that the drain pump is functioning properly.
Yes, the machine has a dedicated 'Delicate' program designed for washing delicate fabrics safely. Always refer to the garment care label before washing.
Ensure the machine is standing level on the floor, check that all transport bolts have been removed, and distribute laundry evenly in the drum.
Locate the filter access panel at the bottom front of the machine, open it, and unscrew the filter cap. Clean any debris and rinse the filter under running water before reinstalling it.
Check if the load is balanced, ensure the machine is not overloaded, and verify that the spin cycle has been selected. If issues persist, there may be a problem with the motor or drive belt.
Leave the door open after each wash to allow the drum to dry, run a maintenance wash with a washing machine cleaner monthly, and regularly clean the detergent drawer and door seal.