Hoover WDWOA596H 1 User Guide
![Hoover WDWOA596H 1 manual cover](/images/wMlmTEhvjsUxMAlYdYVIFwBL/thumbs/thumb175x175.webp)
To start a washing cycle, load your laundry into the drum, add detergent, select the desired program using the control knob, and press the start button.
Check if the drain hose is kinked or clogged. Also, ensure that the pump filter is clean. If the problem persists, consult the user manual or contact customer support.
Remove the detergent drawer by pulling it out gently. Wash it under warm water to remove any residue. Dry it thoroughly before reinserting it into the machine.
Ensure that the machine is level on the floor. Uneven loads can also cause vibrations, so try redistributing the laundry inside the drum.
It is recommended to clean the lint filter after every wash cycle to ensure optimal performance and prevent clogs.
Check if the machine has completely drained and the cycle has finished. If it still won't open, wait a few minutes for the safety lock to release. If the problem continues, consult the manual or contact support.
Run an empty wash cycle at the highest temperature with a small amount of detergent or a washing machine cleaner to remove any build-up inside the drum.
Yes, use the 'Delicate' or 'Hand Wash' cycle settings, which are designed for gentle washing of delicate fabrics.
To reset the washing machine, unplug it from the power source for a few minutes, then plug it back in. This may resolve minor electronic glitches.
Run a maintenance wash with a washing machine cleaner. Also, leave the door open after each wash to allow the drum to dry and prevent odor build-up.