Hoover WDHWD120TD80 User Guide
![Hoover WDHWD120TD80 manual cover](/images/xhUvpBQfpJPFKHULHXVYlFkE/thumbs/thumb175x175.webp)
To start a wash and dry cycle, first load your laundry into the drum. Select your desired program using the control panel, adjust any additional settings according to your needs, and then press the start button.
Check if the drain hose is kinked or blocked. Make sure the filter is clean and there are no clogs in the pump. If the problem persists, consult the user manual or contact customer support.
Remove the detergent drawer by pulling it out gently and pressing the release lever. Wash the drawer with warm water and a soft brush. Ensure it is completely dry before reinserting it into the machine.
Regularly clean the detergent drawer, check and clean the filter, inspect the door seal for any debris or mold, and ensure the drum is free from foreign objects.
Excessive vibration can be caused by an unbalanced load. Make sure the machine is level on the ground and that laundry is evenly distributed inside the drum. Avoid overloading the machine.
After selecting the wash cycle, choose the drying mode by pressing the drying button until the desired drying level is displayed. Options typically include "Iron Dry," "Cupboard Dry," and "Extra Dry."
Turn off the machine and unplug it for a few minutes. Plug it back in and turn it on. If the error persists, consult the user manual for specific error code meanings and solutions.
Ensure the machine is not overloaded and check that the filters are clean. If the problem continues, there may be an issue with the heating element, and you should contact a service technician.
Keep the door slightly open when not in use to allow air circulation. Regularly clean the door seal and the detergent drawer. Run a maintenance wash with a washing machine cleaner monthly.
Distribute clothes evenly around the drum and avoid overloading. Mix large and small items to balance the load, which helps in efficient washing and drying.