Hoover VTS 614D21 1-80 User Guide

To start a wash cycle, load your laundry, add detergent, close the door securely, select the desired wash program using the dial, and press the start button.
Ensure the machine is plugged in, the door is closed properly, and the power switch is turned on. Check the fuse and circuit breaker in your home. If the problem persists, contact customer support.
Remove the detergent drawer completely from the machine, rinse it under warm water to remove any detergent residue, and use a soft brush for thorough cleaning. Reinsert the drawer once dry.
Check if the drain hose is clogged or kinked. Ensure the filter is clean and not blocked by debris. If the issue continues, inspect the pump for obstructions or damage.
Regularly clean the drum, detergent drawer, and filter. Check hoses for signs of wear, and ensure the machine is level to prevent excessive vibration.
Ensure the machine is on a level surface, evenly distribute the laundry inside the drum, and check that the transit bolts have been removed if the machine is newly installed.
Run an empty hot wash cycle with a cup of white vinegar or a commercial washing machine cleaner to remove any buildup or mildew. Leave the door open after use to allow air circulation.
Turn the machine off and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. Select a program and start the cycle to see if the issue is resolved.
Refer to the user manual for the specific error code explanation. Common issues include door lock problems, water supply issues, or drainage problems. Follow the troubleshooting steps provided.
Do not overload the machine, use the correct amount of detergent, and select the appropriate wash cycle for your laundry type. Regular maintenance will also help maintain performance.