Hoover VTO 712D12 2-37 User Guide
![Hoover VTO 712D12 2-37 manual cover](/images/aviRAjbBJSXNyjOvxiWAhpjD/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select your desired program using the control dial, and press the start button. Ensure the door is properly closed before starting.
Check if the drain hose is kinked or clogged. Additionally, inspect the pump filter for blockages. Clean any debris found and ensure the hose is positioned correctly.
Remove the detergent drawer by pulling it out and pressing the release lever. Rinse it under warm water to remove any detergent buildup, and use a brush if necessary. Dry it before reinserting.
Ensure the machine is plugged in and the power switch is turned on. Check if the door is closed properly and the water supply is connected. If the issue persists, inspect the power cord and outlet.
Excessive vibration can be caused by an unbalanced load. Try redistributing the laundry evenly. Also, make sure the machine is level by adjusting the feet if necessary.
Run an empty cycle using hot water and add a cup of white vinegar or a commercial washing machine cleaner. This helps to remove detergent residues and prevent odors.
Check all hoses and connections for tightness and damage. Inspect the door seal for cracks or debris. If leaks persist, consider contacting a service technician.
Ensure the machine is on a stable surface and the load is balanced. Avoid overloading the drum and consider using anti-vibration pads under the feet.
Refer to the user manual to identify the error code. Follow the recommended actions, which may include resetting the machine or checking specific components.
Clean the filter every month to prevent blockages and maintain optimal performance. Access the filter by opening the panel at the bottom front of the machine.