Hoover OPH 716D-80 User Guide
![Hoover OPH 716D-80 manual cover](/images/tgwKmNWUwDdRTTDKwSOshwYf/thumbs/thumb175x175.webp)
To start a wash cycle, first load the laundry and add detergent. Then, select the desired program using the program selector dial, adjust any additional settings on the control panel, and press the start button to begin the wash cycle.
Check for any blockages in the drain hose or filter. Ensure that the drain hose is not kinked or clogged. Clean the filter located at the bottom of the machine and try running the machine again.
Remove the detergent drawer by pulling it out until it stops, then press the release button and pull it out completely. Rinse the drawer under warm water to remove any detergent residue and dry it thoroughly before reinserting.
Regularly clean the detergent drawer and filter, check and clean the door seal to prevent mold buildup, and ensure that the drum is clean by running a maintenance wash with a drum cleaner once a month.
Ensure that the machine is properly plugged into a working power outlet. Check the fuse or circuit breaker and replace or reset if necessary. Also, make sure the door is properly closed as the machine will not start if the door is open.
Ensure that the washing machine is level by adjusting the feet. Check that the laundry load is evenly distributed in the drum, as an uneven load can cause excessive vibration.
Refer to the user manual for the program guide. Turn the program selector dial to choose the appropriate program based on fabric type and soil level, and adjust any additional settings as needed.
Error codes indicate specific issues with the machine. Refer to the user manual for a list of error codes and recommended actions to resolve the issue.
Yes, you can pause the wash cycle by pressing the pause button. Ensure the machine has stopped fully before opening the door to add or remove items. Press the start button to resume the cycle.
Leave the door slightly open after each wash to allow the drum to dry. Regularly clean the door seal and run a maintenance wash with a washing machine cleaner to prevent mold and mildew.