Hoover LBHSW110M UK User Guide

To start a wash cycle, first load your laundry and detergent. Select the desired program using the control dial, adjust any additional settings, and press the start button to begin the cycle.
Ensure that the drain hose is not kinked or blocked. Check the filter for any obstructions and clean it if necessary. Additionally, make sure the drainage height does not exceed the maximum allowed limit.
Remove the detergent drawer by pressing the release lever. Wash the drawer with warm water and a soft brush to remove any detergent residue, then reinsert it back into the machine.
Run an empty hot wash cycle with a drum cleaner or white vinegar once a month to remove any build-up of limescale or detergent residue.
Ensure the washing machine is level by adjusting the feet. Check that the load is balanced and not too large, and that no transit bolts are still installed.
Refer to the user manual to identify the error code. Follow the troubleshooting steps provided or contact customer support if the issue persists.
Leave the door slightly open after each wash to allow the drum to dry. Regularly clean the door seal and run a maintenance wash with a machine cleaner to prevent odors.
Use a high-efficiency (HE) detergent suitable for front-loading washing machines. Always follow the detergent manufacturer's instructions for dosage.
Ensure the machine is not still filled with water. If the machine is empty, wait a few minutes for the lock mechanism to release. If it remains locked, refer to the manual or contact support.
Turn off the power and water supply. Open the filter access panel, unscrew the filter cap, and remove any debris. Rinse the filter under warm water before replacing it.