Hoover LB WDM130 01 User Guide
![Hoover LB WDM130 01 manual cover](/images/bOOpveKtKyIYODaEQuKYdTkH/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add detergent to the dispenser. Select the desired wash program using the control knob, and then press the start button.
Check if the drain hose is kinked or clogged. Ensure the pump filter is clean and not obstructed. If the problem persists, consider contacting a professional technician.
Remove the detergent dispenser by pulling it out gently. Rinse it under warm water to remove any residue. Use a soft brush to clean any stubborn detergent build-up.
Regularly clean the drum, detergent dispenser, and pump filter. Also, check and clean the door seal to prevent mold and mildew. Run an empty hot wash cycle with a washing machine cleaner monthly.
Ensure the machine is level on the floor and that the load is balanced. Check for any foreign objects caught in the drum or pump filter. If the issue continues, the bearings might need inspection.
To reset the machine, unplug it from the power source for a few minutes. Plug it back in and try starting the cycle again.
Yes, you can wash delicate fabrics. Use the 'Delicate' or 'Gentle' cycle and opt for a mild detergent. Consider using a laundry bag for extra protection.
Excessive vibration can be caused by an unbalanced load, an uneven floor, or the transit bolts not being removed. Ensure clothes are evenly distributed and check the machine's stability.
Refer to the user manual for specific error codes. Most issues can be resolved by following the troubleshooting steps outlined. If uncertain, contact Hoover customer support for assistance.
Yes, you can use bleach if necessary. Add it to the designated compartment in the detergent drawer. Ensure you follow fabric care labels and manufacturer's instructions to avoid damage.