Hoover LB HTC 172 User Guide
![Hoover LB HTC 172 manual cover](/images/XfTPHjQubgTfGZwDccHlITGq/thumbs/thumb175x175.webp)
To start the Hoover LB HTC 172, ensure it is plugged in, switch the power button to 'On', and select the desired cleaning mode. Refer to the user manual for specific instructions on mode selection.
First, check for blockages in the hose or nozzle. Clean or replace the filter if necessary. Make sure the dust container is not full. If the problem persists, consult the troubleshooting section of the manual.
The filters should be checked and cleaned every month. Depending on usage, they may need more frequent cleaning. Always ensure that the filters are completely dry before reinstalling them.
Yes, the dust container can be washed with warm soapy water. Make sure it is completely dry before reassembling it back into the vacuum cleaner.
Store the vacuum cleaner in a cool, dry place. Ensure the power cord is neatly wrapped and that the vacuum is in an upright position to prevent any damage.
To replace the belt, first unplug the vacuum. Remove the bottom plate, take out the old belt, and place the new belt around the motor shaft and brush roller. Reattach the bottom plate and ensure everything is secure before use.
A loud noise may indicate a blockage or that the brush roller is obstructed. Check for debris, clean the brush roller, and ensure all parts are properly attached. If the noise persists, contact customer support.
Regularly clean the filters, empty the dust container, and check for blockages. Also, ensure the brush roller is free from hair and debris to maintain optimal performance.
Check if the vacuum is plugged in properly and that the power outlet is working. Inspect the power cord for any damage. If everything seems fine and it still doesn't turn on, seek professional repair services.
Yes, the Hoover LB HTC 172 is safe for hardwood floors. Ensure you use the appropriate setting to prevent scratching and maintain the floor's finish.