Hoover HWQ 610AMBS 1-S User Guide
![Hoover HWQ 610AMBS 1-S manual cover](/images/pItfiikqTyYqDTrQrHtSayOh/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent, select the desired wash program using the control panel, and press the start button.
If the machine is not draining, check the drain hose for blockages, ensure that the pump filter is clean, and make sure the drain hose is positioned correctly.
Remove the detergent drawer by pulling it out gently. Wash it under warm water to remove any detergent residue and let it dry before reinserting.
It is recommended to clean the drum and door seal monthly, check and clean the pump filter every two months, and inspect the hoses for leaks every six months.
To reset the washing machine, unplug it from the power source for a few minutes, then plug it back in. Select your desired program and start the cycle.
Ensure the washing machine is level and all four feet are in contact with the floor. Avoid overloading the machine and distribute the laundry evenly in the drum.
Use the Eco mode for energy-efficient washing, wash full loads whenever possible, and opt for lower temperature settings to reduce energy consumption.
Unusual noises could be due to objects caught in the drum or pump. Check for any foreign objects and ensure the machine is not overloaded.
Leave the door open after each wash to allow the drum to dry and clean the door seal regularly to prevent mold and mildew growth.
Run an empty cycle with hot water and a cup of white vinegar to clean and deodorize the drum. Wipe the drum with a clean cloth afterwards.