Hoover HWD 49AMC 1-S User Guide
![Hoover HWD 49AMC 1-S manual cover](/images/oFeHtwcXPGmqMbufKelOcERs/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent, select the desired wash program using the control panel, and press the start button.
If the machine is not draining, check for blockages in the drain hose or filter. Ensure the hose is not kinked and the filter is clean. If the issue persists, contact customer support.
Remove the detergent drawer by pulling it out and pressing the release lever. Wash it under warm water to remove any residues, and dry thoroughly before reinserting.
Regularly clean the detergent drawer, check and clean the filter, inspect the door seal for debris or mold, and ensure the water inlet hoses are not leaking.
Ensure the machine is level on the floor and that all transit bolts were removed during installation. Distribute the laundry evenly in the drum to avoid imbalance.
Refer to the user manual for the specific error code meaning. Follow the recommended troubleshooting steps, or contact customer service for assistance.
Yes, the machine has a delicate wash program. Select this option on the control panel to ensure gentle washing of delicate fabrics.
To prevent odors, leave the door open after use to allow the drum to dry, and perform a regular maintenance wash using a washing machine cleaner on an empty cycle.
Load the laundry evenly around the drum, without overstuffing, to allow effective cleaning and spinning. Avoid wrapping clothes around the agitator.
To reset the machine, turn it off and unplug it from the power source for a few minutes. Plug it back in and turn it on to reset the system.