Hoover HWB 8135DN 1-S User Guide
![Hoover HWB 8135DN 1-S manual cover](/images/LGhFnlVpOtWkFtjJLOTcdaao/thumbs/thumb175x175.webp)
To start a wash cycle, first ensure the washing machine is plugged in and the water supply is turned on. Load your laundry, add detergent, and select the desired program using the control panel. Press the 'Start/Pause' button to begin the cycle.
If the washing machine doesn't drain, check if the drain hose is kinked or blocked. Ensure the pump filter is clean and that the drain hose is installed at the correct height. If the problem persists, consult the user manual or contact customer service.
Remove the detergent drawer by pulling it out completely and pressing down the release lever. Soak it in warm soapy water, clean any residues with a brush, rinse thoroughly, and dry before reinserting it into the machine.
Regularly clean the detergent drawer, door seal, and drum. Check and clean the pump filter monthly. Ensure the machine is level and the hose connections are secure. Run a maintenance wash monthly using a washing machine cleaner.
Ensure the washing machine is level and adjust the feet if necessary. Avoid overloading the machine, and distribute laundry evenly. Check for any transit bolts that may not have been removed.
To reset the washing machine, turn the dial to the 'Off' position. Unplug the machine for a few minutes, then plug it back in. Select a program and press the 'Start/Pause' button to see if the issue is resolved.
Ensure the cycle has finished and the 'Door Lock' indicator is off. If still locked, unplug the machine and wait for a few minutes. If the issue persists, manually access the latch using the emergency release located near the pump filter.
Turn the program dial to the quick wash option, typically labeled for a short cycle. Adjust temperature and spin settings if needed, then press 'Start/Pause' to begin the cycle.
Error code E03 indicates a draining problem. Check the drain hose for blockages, ensure the pump filter is clean, and verify the drain hose is correctly positioned. Restart the machine to see if the error clears.
Yes, the Hoover HWB 8135DN 1-S has a dedicated wool program. Select this program, use a wool-safe detergent, and ensure the garments are labeled as machine washable.