Hoover HW 210AMBS 1-S User Guide
![Hoover HW 210AMBS 1-S manual cover](/images/tvaMRRicRLNrHdvTijGZZSsI/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired wash program using the control dial, and press the start button.
If the machine is not draining, check for clogs in the drain hose or filter. Ensure the hose is not kinked and the drain pump is functioning. Clean the filter if necessary.
Remove the detergent drawer by pulling it out and pressing the release lever. Wash it under warm water to remove any residue, then dry it before reinserting.
Error code E03 indicates a draining issue. Check the filter and drain hose for blockages and ensure the pump is operational.
Yes, you can pause the cycle by pressing the pause button. Wait for the door lock to release before opening the door.
It is recommended to clean the filter every month to ensure optimal performance and avoid drainage issues.
Use the 'Delicate' wash program, which uses a gentle cycle with lower spin speeds to protect delicate fabrics.
Run an empty wash cycle with hot water and a drum cleaning detergent to remove any buildup. This should be done monthly for maintenance.
Ensure the machine is level and on a stable surface. Check that the laundry is evenly distributed in the drum. Adjust the feet if necessary.
To reset the machine, turn it off and unplug it for a few minutes. Plug it back in and turn it on. This can help resolve minor electronic glitches.