Hoover HSXW 1696TC 1-80 User Guide
![Hoover HSXW 1696TC 1-80 manual cover](/images/rsKhlLNNGnROIAMVjIzSHqHB/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry, add detergent, close the door, select the desired program using the control panel, and press the start button.
Check if the drain hose is kinked or blocked. Also, inspect the pump filter for any obstructions and clean it if necessary.
Remove the detergent drawer by pulling it out and pressing the release lever. Clean it under running water with a brush to remove any residue.
The Hoover HSXW 1696TC 1-80 has a maximum load capacity of 9 kg for cotton cycles.
Ensure the machine is level by adjusting its feet. Also, check that the laundry is evenly distributed inside the drum.
Regularly clean the detergent drawer, inspect and clean the pump filter, and check for any blockages in the drain hose. Also, run a maintenance wash with a machine cleaner monthly.
Ensure the door is properly closed. Check that the machine is plugged in and the power is on. Also, verify that a program has been selected.
After selecting your desired wash program, press the delay start button and adjust the time using the control panel, then press start.
Refer to the user manual to identify the error code. Follow the troubleshooting steps provided, or contact customer support for assistance.
Use lower temperature settings, wash full loads, and select energy-efficient programs. Regular maintenance also helps maintain energy efficiency.