Hoover HNWS 6125-03TROP User Guide
![Hoover HNWS 6125-03TROP manual cover](/images/YdNhjLyCNsPAafZiePpfQLaH/thumbs/thumb175x175.webp)
To start a wash cycle, first ensure the machine is plugged in and the water supply is on. Load your laundry, add detergent, close the door securely, select the desired wash program using the control dial, and press the start button.
Check if the drain hose is kinked or blocked. Make sure the drain pump filter is clean and that the pump is functioning correctly. Refer to the user manual for instructions on accessing and cleaning the filter.
Ensure that the washing machine is level on the floor. Adjust the feet if necessary. Also, avoid overloading the machine and distribute laundry evenly inside the drum.
Check if the power cord is plugged in and the socket is working. Make sure the door is closed properly. Verify that the water supply is turned on and that a program has been selected.
Open the detergent drawer and remove it by pressing the release lever. Wash it under running water to remove any detergent residue. Dry thoroughly before reinserting it into the machine.
Regularly clean the detergent drawer, door seal, and drain pump filter. Run an empty hot wash cycle with a washing machine cleaner to remove any build-up inside the drum.
Error codes indicate specific issues with the machine. Refer to the user manual for a list of error codes and their meanings, along with corresponding troubleshooting steps.
Yes, the Hoover HNWS 6125-03TROP has a delicate wash program. Select this program to wash delicate fabrics, and use a suitable detergent. Place items in a mesh laundry bag for extra protection.
Leave the door slightly open after each wash to allow the drum to dry. Regularly clean the door seal and run a maintenance wash with a machine cleaner. Avoid leaving wet laundry in the drum for extended periods.
Check all hoses for any signs of damage or loose connections. Ensure the door seal is clean and free from debris. Inspect the detergent drawer to ensure it is not blocked.