Hoover HNWF6137S-80 User Guide

To reset the Hoover HNWF6137S-80, turn the power off at the mains, wait for about 1-2 minutes, then turn it back on. This can help resolve minor errors.
Remove the detergent drawer from the machine, rinse it under warm water to remove any residue, and use a soft brush if necessary. Dry thoroughly before reinserting.
Check if there is a blockage in the drain hose or filter. Ensure the hose is not kinked and clean the filter regularly to prevent drainage issues.
Ensure the machine is level by adjusting the feet. Avoid overloading the machine and distribute laundry evenly in the drum to reduce vibrations.
Check for any error codes on the display. Ensure the door is properly closed and the water supply is adequate. Restart the cycle if necessary.
Clean the lint filter at least once a month or after every 10 washes to maintain optimal performance and efficiency.
Yes, you can use bleach by adding it to the detergent drawer following the instructions on the bleach container. Run a rinse cycle afterwards to remove any bleach residue.
Odors can develop from detergent residue or mold. Run a hot wash cycle with vinegar or a washing machine cleaner to eliminate smells. Leave the door open after washes to air out the drum.
Ensure the cycle is complete. If the door remains locked, wait a few minutes for the lock mechanism to release. If it persists, check the manual for emergency release instructions.
Refer to the user manual for guidance on selecting the appropriate program based on fabric type and soil level. Use the control panel to set the desired program.