Hoover HNL9136-80 User Guide

To start a wash cycle, load your laundry, add detergent, select the desired wash program using the control dial, and press the start button.
Check if the drain hose is kinked or clogged. Ensure the filter is clean and the drain pump is functioning properly.
Remove the detergent drawer by pulling it out while pressing the release lever. Rinse it under warm water to remove any detergent residue.
Regularly clean the drum, door seal, and detergent drawer. Run a maintenance wash monthly with a drum cleaner to prevent buildup.
Ensure the machine is level and balanced. Check if the load is evenly distributed and adjust as necessary.
Verify that the machine is plugged in, the door is closed properly, and the water supply is turned on. Check if any error codes are displayed.
Inspect the door seal for damage and ensure it's clean. Check the hoses and connections for any leaks or loose fittings.
Unplug the machine from the power outlet, wait for a few minutes, and then plug it back in to reset the system.
Refer to the user manual to interpret the specific error code and follow the recommended troubleshooting steps.
Use the correct amount of detergent, select appropriate wash cycles for different types of fabrics, and avoid overloading the machine.