Hoover HL4 1472D3 1-80 User Guide
![Hoover HL4 1472D3 1-80 manual cover](/images/KjAVupmzuLEeLmLRncePqVLK/thumbs/thumb175x175.webp)
To reset the Hoover HL4 1472D3 1-80 washing machine, turn off the appliance and unplug it from the power source for a few minutes. Then, plug it back in and turn it on. This should reset the machine's electronics.
First, check if the drain hose is kinked or blocked. Ensure the pump filter is clean and clear of debris. If these are fine, inspect the pump itself for any obstructions and test its functionality.
Remove the detergent drawer by pulling it out until it stops, then press the release button to fully remove it. Rinse the drawer under warm water to remove any detergent residue, and use a brush for stubborn deposits.
Run an empty hot wash cycle with a cup of white vinegar or a washing machine cleaner monthly. This helps remove any soap scum and bacteria, keeping the drum fresh and clean.
Ensure the washing machine is level and all four feet are firmly in contact with the floor. Check if the load is balanced and not too heavy. Redistribute the clothes if necessary and avoid overloading the machine.
Clean the drum with a mixture of baking soda and vinegar. Also, check and clean the door seal for trapped debris. Leave the door open after washes to air out the interior.
Check if the appliance is properly plugged in and the socket is functional. Make sure the door is closed securely and the water supply is connected. If the problem persists, inspect the fuse or circuit breaker.
Regularly clean the lint filter if your model has one. Avoid washing lint-producing items with lint-attracting fabrics. Use a fabric softener or vinegar rinse to help reduce static and lint.
Yes, use the 'Delicate' or 'Wool' cycle designed for fragile items. It uses a gentler washing action and lower spin speeds to protect delicate fabrics from damage.
Inspect the door seal for damage or debris and ensure the door is closing properly. Check all hoses and connections for any signs of leaks or damage. Tighten or replace any faulty components.