Hoover HDB 244-80 User Guide
![Hoover HDB 244-80 manual cover](/images/qyfTFKzYLNHQSQyYOqjPcLri/thumbs/thumb175x175.webp)
To reset the Hoover HDB 244-80, turn off the dishwasher, wait for about 30 seconds, and then turn it back on. This should clear any error codes and reset the machine.
Check the drain hose and filter for any blockages. Ensure that the hose is not kinked and that the filter is clean. If the problem persists, inspect the pump for debris.
To clean the filter, remove the bottom rack, twist the filter counterclockwise to unlock it, and then lift it out. Rinse it under running water and use a soft brush to remove debris before reinstalling it.
Place larger and more soiled items on the bottom rack, ensuring they do not block the spray arms. Use the top rack for smaller items and more delicate glassware. Follow manufacturer's guidelines for optimal loading.
Unusual noises may be caused by items that are improperly loaded and are hitting the spray arms. Ensure dishes are securely placed and not touching each other or the dishwasher walls.
It's recommended to clean the interior of your Hoover HDB 244-80 once a month. Use a damp cloth to wipe the door seals, and run an empty cycle with a dishwasher cleaner to prevent buildup.
The error code E3 indicates a heating issue. Check the heating element and thermostat for faults. If the problem persists, professional service may be required.
To enhance drying performance, ensure that the rinse aid dispenser is filled. Also, use the heated dry option if available, and open the door slightly after the cycle to allow steam to escape.
No, regular dish soap should not be used in a dishwasher as it creates excessive suds and can damage the machine. Always use a detergent specifically formulated for dishwashers.
Regularly clean the filter and spray arms, check and clean the door seals, ensure the rinse aid dispenser is filled, and run a monthly cleaning cycle with a dishwasher cleaner.