Hoover HBWOS 69TMCE-80 User Guide
![Hoover HBWOS 69TMCE-80 manual cover](/images/b2e8bbf5479feb1289f6cfd7/thumbs/thumb175x175.webp)
To start a new wash cycle, plug in the machine, load your laundry, add detergent, select the desired program using the control dial, and press the start button.
Check if the drain hose is kinked or clogged. Also, inspect the filter for any debris that might be blocking the drainage. Clean as necessary.
Remove the detergent drawer by pulling it out and pressing the release lever. Wash it under warm water to remove any residue, then dry it and place it back in the machine.
Ensure that the washing machine is level on the ground. Adjust the feet if necessary. Also, check if the laundry load is balanced.
Regularly check and clean the filter, detergent drawer, and drum. Inspect the hoses for signs of wear or leaks and ensure the machine is level.
To reset the machine, turn it off and unplug it for a few minutes. Plug it back in and turn it on to see if the error has cleared.
Leave the door and detergent drawer slightly open after each wash to allow airflow. Regularly clean the door seal and run a maintenance wash using a washing machine cleaner.
Ensure the machine is plugged in and the door is fully closed. Check if the water supply is turned on and if there are no error messages displayed.
The Hoover HBWOS 69TMCE-80 can handle a maximum load capacity of 9 kg. Avoid overloading to ensure optimal performance.
Refer to the user manual for guidance on selecting wash programs based on fabric type and soil level. Use the control dial to choose the desired program.