Hoover DYN 9144DPG-16S User Guide

To start a wash cycle, load your laundry into the drum, add detergent, select the desired program using the control dial, adjust any settings if necessary, and press the start button.
Check if the drain hose is kinked or blocked. Ensure the pump filter is clean and free of debris. If the problem persists, consult the user manual or contact customer support.
Remove the detergent drawer by pulling it out and pressing the release lever. Rinse it under warm water to remove any residue and dry it before reinserting.
Regularly clean the detergent drawer, check and clean the pump filter, inspect the door seal for debris, and run an empty hot wash cycle with a washing machine cleaner to prevent odors.
Ensure the washing machine is level and all four feet are firmly on the ground. Check if the load is balanced inside the drum, and avoid overloading the machine.
Yes, use the delicate or hand-wash cycle option on the machine, and consider using a mesh laundry bag to protect delicate fabrics.
Turn off the machine, unplug it from the power source for a few minutes, then plug it back in and restart. If the error persists, refer to the error code section in the user manual.
The door may remain locked if there is water still in the drum. Ensure the cycle is complete and the drum is drained. If the problem continues, inspect the door lock mechanism.
Use cold water settings when possible, run full loads instead of multiple small ones, and choose energy-efficient wash cycles. Regular maintenance also helps optimize efficiency.
Leave the door slightly ajar between uses to allow air circulation, regularly clean the door seal and detergent drawer, and periodically run an empty hot wash with a washing machine cleaner.