Hoover DXOC 69AFN3 1-80 User Guide
![Hoover DXOC 69AFN3 1-80 manual cover](/images/23944347e88a79e3ee3ac896/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum, add detergent, and close the door. Then, select your desired wash program using the program dial, adjust any additional settings as needed, and press the start/pause button to begin the cycle.
Ensure the machine is plugged in and switched on. Check if the door is closed properly and that the water supply is turned on. If the problem persists, consult the troubleshooting section of the user manual.
Remove the detergent drawer by pulling it out gently and pressing the release button. Rinse it under warm water to remove any residue, then dry it thoroughly before reinserting it into the washing machine.
Check if the machine is level by adjusting the feet at the bottom. Ensure that the load is balanced inside the drum. Avoid overloading the machine and redistribute the laundry if necessary.
Turn off the machine and unplug it. Open the filter cover located at the bottom front panel. Unscrew the filter cap and remove any debris or lint. Rinse it under running water, then replace it securely.
Regularly clean the detergent drawer, filter, and door seal. Run a maintenance wash with a washing machine cleaner once a month to prevent odor and limescale build-up. Check hoses for any signs of wear or leaks.
Check if the drain hose is kinked or blocked. Ensure that the filter is clean and not clogged. If the problem continues, inspect the pump for any obstructions and consult the user manual for further troubleshooting.
Use the rapid wash cycle for smaller loads, which offers a shorter washing time. Adjust the spin speed and temperature settings to suit the laundry type and save time.
Yes, select the delicate or hand wash program specifically designed for sensitive fabrics. Use a mild detergent and avoid high spin speeds to protect your garments.
Leave the door and detergent drawer open after each wash to allow air circulation. Regularly clean the door seal and run a maintenance wash with a washing machine cleaner to keep mold and mildew at bay.