Hoover DXOC 49AC3 1-80 User Guide

To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired wash program using the control dial, and press the start button.
Check if the drainage hose is kinked or blocked. Ensure the filter is clean and free from debris. If the problem persists, consult the user manual or contact customer support.
Remove the detergent drawer by pulling it out and pressing the release button. Rinse it under warm water to remove any detergent residue, and use a brush to clean hard-to-reach areas.
Excessive vibrations can be caused by an unbalanced load. Try redistributing the laundry evenly in the drum. If the issue continues, ensure the machine is level and placed on a stable surface.
Select the desired wash program, then press the delay start button to set the time delay. Confirm the selection by pressing the start button.
Regularly clean the detergent drawer, check and clean the filter, inspect and clean the door seal, and ensure the drainage hose is not blocked.
The E03 error code indicates a drainage problem. Check the drain pump and filter for blockages and ensure the drainage hose is not kinked.
To reset the washing machine, turn it off and unplug it for a few minutes. Plug it back in and turn it on. This should reset the system.
Yes, you can wash wool garments using the dedicated wool program, which uses a gentle washing action to protect the fabric.
Use cold wash programs when possible, ensure the machine is fully loaded, and regularly clean the filter to maintain efficiency.