Hoover DXOA 69HC3B 1-80 User Guide
![Hoover DXOA 69HC3B 1-80 manual cover](/images/d10532d8980869de4d9adb89/thumbs/thumb175x175.webp)
Ensure the washing machine is plugged in and the water supply is on. Load your laundry, add detergent, and select the desired wash program using the control panel. Press the 'Start' button to begin the cycle.
Check if the drain hose is kinked or blocked. Make sure the pump filter is clean and free from debris. If the problem persists, consult the user manual or contact Hoover customer support.
Remove the detergent drawer by pulling it out and pressing the release clip. Rinse it under running water and use a brush to remove any buildup. Dry it thoroughly before placing it back into the machine.
Ensure the washing machine is level and on a stable surface. Check if the transit bolts have been removed and that the load is balanced. Adjust the feet if necessary to stabilize the machine.
Run an empty wash cycle at the highest temperature with a drum cleaner or vinegar to remove any residue inside the drum. This should be done every few months to maintain hygiene and performance.
Error code E03 usually indicates a drainage issue. Check the drain pump and filter for blockages, and ensure the drain hose is properly installed. If the error persists, contact a service technician.
Use the Eco program for energy-efficient washing and avoid overloading the machine. Wash at lower temperatures when possible and ensure regular maintenance for optimal performance.
Yes, you can delay the start of a wash cycle by using the delay start function on the control panel. Select your desired program, then use the delay button to set the time you want the cycle to start.
Regularly clean the detergent drawer, filter, and drum. Check hoses for leaks or damage, and keep the exterior clean. Perform a drum clean cycle every few months to prevent odor and buildup.
Check if the machine is plugged in and the door is closed properly. Ensure the water supply is on and the control panel is responsive. If these are all correct and the machine still does not start, consult the manual or contact support.