Hoover DXOA 49C3B-80 User Guide
![Hoover DXOA 49C3B-80 manual cover](/images/3465d290950555d718b91b5c/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add detergent to the detergent drawer. Close the door securely, select the desired wash program using the program dial, and press the start button.
If the machine fails to start, ensure it is plugged in and switched on at the power outlet. Check if the door is closed properly. Also, verify that the water supply is turned on and the start button has been pressed.
To clean the detergent drawer, pull it out gently until it stops. Press down on the release lever and remove the drawer completely. Rinse it under warm water to remove any detergent residue. Dry it thoroughly before reinserting.
Error codes indicate specific issues with the machine. Refer to the user manual for a list of error codes and their meanings. Address the issue based on the guidance provided in the manual.
Regularly clean the detergent drawer, door seal, and drum. Run a maintenance wash once a month using a washing machine cleaner. Check and clean the filter regularly, and ensure the machine is level to prevent excessive vibration.
If the machine is not draining, check for blockages in the drain hose and pump filter. Ensure the hose is not kinked or clogged. Clean the filter and try running the drain cycle again.
Yes, the Hoover DXOA 49C3B-80 has a dedicated program for delicate fabrics. Select the appropriate program using the program dial, and use a mild detergent for best results.
To reduce noise, ensure the washing machine is level and stable. Check that the transit bolts have been removed after installation. Avoid overloading the drum and secure any loose items inside.
Excessive vibration can be caused by an imbalance in the load. Pause the cycle and redistribute the laundry evenly. Ensure the machine is on a flat, stable surface and that the adjustable feet are properly set.
To access the filter, open the service panel located at the bottom front of the machine. Place a shallow pan or towel under the filter to catch any water. Unscrew the filter cap and remove any debris. Rinse the filter under running water before reinserting it.