Hoover DXOA 49AFN3 1-80 2016 User Guide

To reset the Hoover DXOA 49AFN3 1-80, switch off the machine and unplug it from the power source. Wait for about 2 minutes, then plug it back in and switch it on. This should reset the control board.
First, check for any blockages in the drain hose or pump filter. Ensure the hose is not kinked or clogged. Clean the pump filter, which is usually located at the bottom front of the machine behind a small door.
Remove the detergent drawer by pulling it out gently and pressing the release button. Wash it under warm water to remove any detergent residue and mildew. Ensure it is completely dry before reinserting.
Run a maintenance wash once a month using a drum-cleaning detergent or a mixture of vinegar and baking soda. Use the hottest wash cycle without any laundry inside.
Ensure the washing machine is level by adjusting its feet. Check if the load is balanced and not overcrowded. Use a spirit level to verify the machine's stability.
Refer to the user manual for error code meanings. Follow the recommended troubleshooting steps, such as checking water supply, ensuring proper load balance, or cleaning filters.
Clean the pump filter every month or whenever you notice issues with drainage, to prevent blockages and ensure efficient operation.
Yes, the machine has a dedicated cycle for delicates. Use a gentle detergent and place delicate items in a mesh laundry bag to protect them during the wash.
Check if the machine is still in the lock cycle. Wait for a few minutes for the lock to release. If it remains locked, ensure the water has drained completely and try again.
Avoid overloading the machine and use the appropriate detergent amount. Regularly clean the drum, detergent drawer, and filters. Use energy-efficient wash cycles whenever possible.