Hoover DXOA 412AHFN-80 User Guide
![Hoover DXOA 412AHFN-80 manual cover](/images/3402739bd90a25e34a1657ae/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add the appropriate amount of detergent to the detergent drawer. Select your desired wash program using the program dial, then press the start button.
Ensure the machine is properly plugged into a power outlet and that the door is closed securely. Check if the program has been selected and the start button has been pressed. If the issue persists, consult the troubleshooting section of the user manual.
Remove the detergent drawer by pulling it out until it stops, then press the release lever to fully remove it. Rinse it under warm water to remove any residue, then dry it thoroughly before reinserting it into the machine.
Excessive vibration can be caused by an unbalanced load, improper leveling of the machine, or a surface that isn't stable. Ensure the washing machine is on a flat surface and that the load is evenly distributed. Adjust the leveling feet if necessary.
To use the delay start feature, select your desired program and then press the delay start button. Use the buttons or dial to set the desired delay time. Press the start button to activate the cycle after the selected delay.
Regular maintenance includes cleaning the detergent drawer, inspecting and cleaning the filter, and checking the door seal for any debris. It's also advisable to run a maintenance wash with a machine cleaner periodically.
Refer to the user manual for a list of error codes and their meanings. Most codes indicate specific issues such as water supply problems or drainage issues. Follow the recommended steps to resolve these errors.
Yes, the machine has a dedicated delicate or hand wash program designed to gently wash delicate fabrics. Always check the garment care label for specific washing instructions.
The maximum load capacity of the Hoover DXOA 412AHFN-80 is 12 kg. Ensure not to exceed this limit to maintain optimal washing performance and avoid damage to the machine.
To reset the washing machine, turn the program dial to the off position, wait for a few seconds, and then select the desired wash program again. This can help resolve minor software glitches.