Hoover DXOA 148TLW3-80 User Guide

To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, close the door securely, select the desired wash program using the control dial, and press the start button.
Check if the drain hose is kinked or blocked. Also, inspect the pump filter for any obstructions. Make sure the drain hose is installed at the correct height.
Ensure the washing machine is level and all four feet are firmly on the ground. Avoid overloading the machine and distribute clothes evenly in the drum to maintain balance.
Regularly clean the detergent drawer, pump filter, and the drum. Also, run a maintenance wash once a month using a washing machine cleaner to prevent residue buildup.
Error code E03 indicates a drainage issue. Check the drain pump filter for blockages and ensure the drain hose is not obstructed or kinked.
Yes, use the dedicated wool wash program, which is designed to gently clean wool items while minimizing agitation to prevent damage.
Remove the detergent drawer from the machine, rinse it under warm water, and use a soft brush to remove any residue. Ensure all compartments are clean before reinserting.
Ensure the door is closed properly, check the power supply, and make sure the start button has been firmly pressed. Verify if the child lock is activated and deactivate it if necessary.
Leave the door and detergent drawer open after each wash to allow air circulation. Regularly clean the drum and use a washing machine cleaner to remove any buildup.
Yes, you can pause a wash cycle by pressing the start/pause button. Ensure the water level is not too high before opening the door to add or remove items.