Hoover DXA 610 AIW3 1-80 User Guide

To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired wash program using the control dial, and press the start button.
Ensure the machine is plugged in and the door is closed properly. Check the fuse and power supply. If the problem persists, consult the user manual or contact customer support.
Remove the detergent drawer by pulling it out and pressing the release lever. Rinse it under warm water to remove any detergent residue and mildew. Dry it thoroughly before reinserting.
Ensure the machine is level and stable on the floor. Adjust the feet if necessary and redistribute the laundry to balance the load.
Run an empty wash cycle at the highest temperature with a cup of white vinegar or a washing machine cleaner to remove limescale and detergent build-up.
Check for blockages in the drain hose and pump filter. Clean them if necessary and ensure they are not kinked. If the issue continues, seek professional assistance.
Leave the door and detergent drawer open after each wash to allow air circulation. Regularly clean the door seal and run maintenance washes.
Yes, use the dedicated delicate or hand wash program and a suitable detergent for delicate fabrics. Always check the garment care label before washing.
Distribute laundry evenly around the drum, do not overload, and mix different types of garments to balance the load and improve wash results.
It is recommended to clean the pump filter every month or when the machine shows signs of draining issues to maintain optimal performance.