Hoover DXA 510AH 1S User Guide

To start a wash cycle, load your laundry into the drum, add detergent, close the door, select your desired program using the control dial, and press the start button.
Ensure that the washing machine is plugged in, the door is closed properly, and that the water supply is turned on. Check if the start button has been pressed.
Turn off the machine and unplug it. Locate the filter access panel, usually at the bottom front. Open it, remove the filter, clean it under running water, and then replace it securely.
Check if the drain hose is kinked or blocked. Also, ensure that the filter is clean and the drain pump is functioning properly.
Regularly clean the detergent drawer, door seal, and filter. Run a maintenance wash with an empty drum using a washing machine cleaner monthly.
Ensure the washing machine is level and on a stable surface. Avoid overloading the drum and evenly distribute the laundry inside.
Use high-efficiency (HE) detergents to prevent excess suds and ensure optimal washing performance.
Refer to the user manual for specific error codes. Common solutions include checking water supply, ensuring proper drainage, and resetting the machine.
Unplug the washing machine for a few minutes, then plug it back in and restart. This can help reset the electronics to default settings.
The maximum load capacity is 10 kg for cotton cycles. Refer to the manual for specific capacities for other programs.