Hoover DWT L68 AIW3 80 User Guide
![Hoover DWT L68 AIW3 80 manual cover](/images/8c5bb3cf4b28f97ce69d4fd2/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry, add detergent, close the door, select the desired program using the control knob, and press the 'Start/Pause' button.
If your machine is not draining, check the filter for blockages, ensure the drain hose is not kinked, and verify that the pump is functioning correctly.
Remove the detergent drawer by pressing down the release latch and pulling it out. Wash it under running water to remove any detergent residue, and use a brush for tough deposits.
Regularly clean the detergent drawer, door seal, and filter. Run an empty cycle with a washing machine cleaner monthly to prevent residue buildup.
Ensure the washing machine is level by adjusting its feet. Also, confirm that the laundry load is balanced inside the drum.
If the door won't open, wait a few minutes for the lock mechanism to release. If it remains locked, check if the machine has completed its cycle and ensure the water level is low enough.
Use lower temperature settings, wash full loads, and select eco-friendly cycles to reduce energy consumption.
Error code E03 indicates a drainage issue. Check the filter and drain hose for blockages, and ensure the pump is operational.
Locate the filter access door at the bottom front of the machine. Open it, unscrew the filter cap, and remove any debris. Rinse the filter under running water before reinserting it.
Yes, select the 'Delicates' program, use a gentle detergent, and avoid overloading the machine to safely wash delicate fabrics.