Hoover DST 11146PCH-80 User Guide
![Hoover DST 11146PCH-80 manual cover](/images/bd904fa1f4e8f7d4d434ebc4/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent, select the desired program using the program selector dial, and press the start button.
Ensure that the machine is properly plugged into a power outlet, the door is closed securely, and the water supply is turned on. Check the control panel for any error codes.
Remove the detergent drawer by pulling it out fully and pressing down on the release lever. Wash it with warm water and a soft brush to remove any residues or build-up.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the filter, and running an empty hot wash cycle with vinegar or a washing machine cleaner.
Check the door seal for damage or debris, ensure hoses are securely connected, and make sure the detergent drawer is properly closed.
Ensure the machine is level on the floor and not overloaded. Check that transit bolts have been removed if the machine is newly installed.
Wash full loads, use cold water cycles when possible, and ensure regular maintenance to keep the machine running efficiently.
The 'E03' error indicates a drainage problem. Check the filter for blockages, ensure the drain hose is not kinked, and inspect the pump.
Yes, select the 'Delicate' program on the machine, use a suitable detergent, and avoid overloading the drum.
To reset the machine, unplug it from the power supply for a few minutes, then plug it back in and restart the washing cycle.