Hoover DHL 149DB3B-80 User Guide
![Hoover DHL 149DB3B-80 manual cover](/images/df6b4fcf83b8412ab5538b3b/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired wash program using the program dial, and press the start button.
Ensure that the machine is plugged in, the door is properly closed, and the water supply is turned on. Also, check if the start button has been pressed.
Remove the detergent drawer by pulling it out and pressing the release lever. Rinse it under warm water to remove detergent residues and reinsert it back.
Periodically clean the filter by turning off the machine, unplugging it, and opening the filter cover. Remove the filter and clean it under running water. Reinsert it securely.
Check if the drain hose is kinked or blocked. Ensure the filter is clean. If the problem persists, there might be a pump issue that requires professional servicing.
Ensure the machine is on a level surface. Check if the transit bolts have been removed and that the laundry load is evenly distributed inside the drum.
Regularly clean the drum and gasket with vinegar or a washing machine cleaner, leave the door open after cycles to air out, and use the machine's cleaning program if available.
The E03 error code indicates a drainage issue. Check the pump filter, drain hose, and ensure that there is no blockage.
Select the desired wash program, then press the spin speed button to cycle through available speeds until your preferred option is selected.
Yes, you can pause a cycle by pressing the start/pause button. Once the machine is paused, you can add or remove laundry before resuming the cycle.