Haier HRF-618SS User Guide
![Haier HRF-618SS manual cover](/images/7c23a8e05b2c6201b50e420e/thumbs/thumb175x175.webp)
To set the temperature for the Haier HRF-618SS, use the control panel located inside the refrigerator. For optimal performance, set the refrigerator compartment to 4°C (39°F) and the freezer compartment to -18°C (0°F).
If the Haier HRF-618SS is not cooling properly, check if the doors are closed tightly, the temperature settings are correct, and the condenser coils are clean. Ensure that the appliance is not overloaded and that there is adequate ventilation around it.
The Haier HRF-618SS is designed with a frost-free system, so manual defrosting is not required. However, it is advisable to clean the interior and exterior of the appliance regularly.
To clean the Haier HRF-618SS, unplug the appliance and remove all food items. Use a mild detergent and warm water to clean the interior and shelves. Avoid using abrasive cleaners. Wipe the exterior with a damp cloth and dry thoroughly.
To replace the water filter in the Haier HRF-618SS, locate the filter compartment inside the refrigerator. Turn the filter counterclockwise to remove it, then install the new filter by turning it clockwise until it locks in place.
Water leaking from the Haier HRF-618SS could be due to a blocked defrost drain, improper leveling, or a damaged door seal. Check these areas and clean or repair as necessary.
The doors of the Haier HRF-618SS are not reversible. Ensure that the appliance is placed in a location where the doors can open freely without obstruction.
If the ice maker in the Haier HRF-618SS is not producing ice, ensure that the ice maker is turned on, the water supply line is connected, and there are no kinks in the line. Check for any ice blockages and clear them if present.
To organize food inside the Haier HRF-618SS, keep similar items together, use clear containers to store leftovers, and place frequently used items at the front. Ensure that air can circulate freely around the food items.
To adjust the shelves in the Haier HRF-618SS, simply lift the shelf and tilt it upward to remove it from its current position. Reposition the shelf at the desired height by aligning it with the shelf supports and lowering it into place.